PRESSURE MULTIPIERS: How to maximize the power of your systems.

ENERFLUID pressure multipliers offer you a simple and cheap way to optimize the force available, allowing you to perform more demanding tasks more efficiently

How can you maximize the effectiveness of your tools using ENERFLUID pressure multipliers?
In this article, we will guide you through some tips to get the most out of your equipment.

You will find out how to choose the right pressure multiplier for your specific needs and how to care for them to keep them at the best condition.

Introduction to ENERFLUID pressure multipliers.

Pressure multipliers are devices designed to increase the pressure supplied to systems. They work by using the principle of energy transmission through compressible fluids, allowing to obtain a greater power than the initial pressure.

Advantages of using ENERFLUID pressure multipliers:

The use of pressure multipliers offers numerous advantages to users of hydraulic equipment. Here are some of the main ones:

1.       Increased Power : Pressure multipliers allow you to obtain more power than simple feed power.

2.       Instant Force : Force immediately available.

3.   Flexibility : Pressure multipliers allow you to adapt the power to different applications, ensuring efficient work.

4.     Energy saving : By using a pressure multiplier, high power can be achieved using only one air line.

5.    Small dimensions : Pressure multipliers have very small dimensions compared to hydraulic power units.

6.    Easy to use : Pressure multipliers are simple devices to use and require little technical experience to operate.

7.    Economic advantages : The pressure multiplier represents a cost-effective solution compared to hydraulic power units and requires minimal maintenance costs.

 There are different types of ENERFLUID pressure multipliers, each with specific characteristics and applications. Here are some of the most common types:

a.       Air/oil pressure multipliers : single-acting closed hydraulic circuit, connected to an oil tank. Operation via air in the pneumatic circuit from the appropriate inlet.

b.        Oil/oil pressure multipliers : hydraulically action working by oil in the circuit by the appropriate inlet

c.        Air/water pressure multipliers : specific for carrying out tightness and resistance tests on hydraulic tanks of many volumes.

The choice of the type of multiplier will depend on the specific needs of the job and the characteristics of the systems you want to use.

Factors to consider when choosing an ENERFLUID pressure multiplier.

Before purchasing a pressure booster, it is important to consider some key factors to ensure you choose the device that best suits your needs. Here are some of the main factors:

1. Power Required : Evaluate the power required to perform the intended tasks. This will help youto find the level of pressure needed and therefore the most appropriate type of pressure multiplier.
2. Desired type of management: single or double acting. / effect
3. Work cycle speed: if you have to carry out cycles at a high rate, it is better to opt for a pneumatic return pressure multiplier.
4. Required volume: preview quantity of liquid dispensed with a margin of 20% above the actual need.

Considering these factors, it will be possible to choose the pressure multiplier more suitable for your needs.

Tips for optimizing operation.

Now that you have chosen the air pressure multiplier that best suits your needs, here are some tips to maximize the power of your pneumatic tools.

1.      Adjust the pressure correctly : Make sure you adjust the pressure correctly according to your specifications. Finding the right balance between power and control is essential to achieve the best results.

2.      Choose the mounting position : horizontal or vertical mounting with the pump facing upwards (in the case of vertical position, be careful to orient the tank).   It is recommended to have the oil tank positioned slightly higher.

3.      Drain the air from the system : During the first phase of installation, proceed with the appropriate air drain as reported in the manual that will be delivered.

4.     Use appropriate oils : Use mineral hydraulic oil. This will help reduce friction and wear on components, ensuring  good functioning and extending their life.

By following these tips, you can optimize the power of your pneumatic tools and work more efficiently.